Pressure sensor core

The ES series strain - type cores are small in size, light in weight, high in accuracy, and easy to install and use.

Key words:

Downloads:

Detailed Description

I.Overview of ES series sensor cores

The ES series strain - type cores are small in size, light in weight, high in accuracy, and easy to install and use. They have strong resistance to vibration and impact, and can withstand an overload of 100% - 300% of the nominal range (varying depending on the core type). They have high sensitivity, reaching up to 1 micro - strain. Some cores have good dynamic response and can respond to dynamic strains as high as 0 - 500,000 Hz. Many products have obtained patents. They are widely used in the measurement and control of the pressure of media such as water, oil, gas, gel, mortar, glue, food chemicals, powders, and non - setting slurries and adhesives (varying depending on the core type).

II.Operation environment of ES series sensor cores

1.Ambient temperature: - 30~70℃;

2. Relative ambient humidity: ≤90% (at 25℃);

3.Atmospheric pressure: 80-106KPa

4.Without strong vibration and impact;

5.Measurement of the pressure of various liquids, gases, powders, slurries, etc. that are compatible with the contact medium materials

The basic common parameter indicators of ES series sensor cores

Pressure range0—0.3…150MPa …300MPa
overloadWhen the full-scale is less than 100MPa, it is 1.5 times the full-scale pressure. 
When the full scale is greater than or equal to 100MPa, it is 1.3 times the full scale pressure
Accuracy0.1%FS/0.2%FS/0.25%FS/0.3%FS/0.5%FS/1%FS/ 2%FS
Operation temperature range-30ºC~70ºC
Temperature compensation range-20ºC~60ºC
Stability≤±0.2%FS
Power supply0~12VDC
sensitivity1.0±0.3%mV/V
Insulation resistance500MΩ/250VDC;
Impedance1000±100Ω;It can be achieved 2200±100Ωunder special circumstance
Zero output±0.5%FS
Zero drift±0.5%FS /10ºC
Explosion-proof formMine intrinsically safe type
IP ratingIP54

Applications

Product consultation

Related Products